Omron FQ2 Series, Руководство пользователя

Страница: 249 / 516

Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
FQ2 User’s Manual
247
8
Co
ntro
llin
g Operatio
n an
d Ou
tp
utti
ng Da
ta
with a Parall
el Con
nection
Timing Chart
Settings
[In/Out]
−
[I/O setting]
−
[I/O setting]
−
[Input]
−
[Input mode]
The scene numbers that can be used depend on the input mode.
[Standard mode] (default): Scene 0 to 31
[Expanded mode]: Scene 0 to 15
1 Specify the scene number
with the IN0 to IN4 signals.
(Standard Mode)
2 Turn ON the IN5 signal while
the BUSY signal is ON to
change the scene to the
specified scene.
3 The BUSY signal turns ON
while the scene is being
switched.
Even in Expanded Mode, you can use menu commands or Ethernet no-protocol commands to change to
scenes 0 to 31.
OFF
O N
OFF
O N
*1: In Expanded Mode, specify scene n u m b ers 0 to 15 u sing the
I N 0 to I N 3 signals.
End scene change
Start scene change
BUSY signal
I N 5 signal
O N for 1 ms min.
Allo w 5 ms min. and then t u rn O N I N 5.
Scene n u m b er 0 to 31
I N 0 to I N 4 signals
(in Standard Mode) *1
Note