Omron CRT1 - 10-2008, Руководство по эксплуатации

Страница: 427 / 584

404
Functions Common to All Slave Units Section 11-2
3. Click the General Tab. Enter the desired value in the Network Power Volt-
age Threshold Field. (The default is 14 V.)
4. Click the Transfer [PC to Unit] Button to download the data, and then click
the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
11-2-4 Unit Conduction Time Monitor
Description
The cumulative time that power is ON (i.e., the Total ON Time) to the Slave
Unit's internal circuits can be stored in the Slave Unit memory. (This data can
be read using the CX-Integrator or using explicit messages.)
The monitor value is stored in the Slave Unit memory so once the total ON
time reaches the monitor value, a flag in a status area in the Slave Unit turns
ON to notify the Master Unit. The notification details can be read using the
CX-Integrator or using explicit messages.
• Measurement time: 0 to 429,496,729.5 h
(Stored data: 0000 0000 to FFFF FFFF hex)
• Measurement unit: 0.1 h
• Storage unit: 0.2 h