Omron CRT1 - 10-2008, Руководство по эксплуатации

Страница: 348 / 584

325
Overview of Temperature Input Units Section 7-2
■
Allocating Selected I/O Data Patterns
Data such as Status Flags can be allocated together with Temperature Data 1
as I/O in the following combinations. The data to be combined can be selected
from the CX-Integrator.
Example: Allocating Temperature Data 1 + Top/Valley Detection Timing Flags
in the Master Unit using normal display.
■ Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the Temperature Input Unit.
2. Double-click the icon of the Temperature Input Unit to be set in the Network
Configuration Window or right-click the icon and select
Parameter - Edit .
The Configuration Window will be displayed.
3. Click the General Tab and select an I/O data pattern in the Default Con-
nection Path (In) Field. The following example shows selecting the temper-
ature data and status flags.
4. Click the Transfer [PC to Unit] Button to download the data and then click
the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
I/O Data
Temperature Data 1 Temperature Data 1 is used to monitor the temperature input value. The tem-
perature input value is allocated as the default setting, but any of the following
data can be allocated: temperature input value, peak value, bottom value, top
value, valley value, or rate of change.
Note The comparator function can be used for the data allocated as Temperature
Data 1.
15 8 7 0
Temperature Data 1 for Input 0
Temperature Data 1 for Input 1
Temperature Data 1 for Input 2
Temperature Data 1 for Input 3
Top Detection Timing Flag Valley Detection Timing Flag