Omron CRT1 - 10-2008, Руководство по эксплуатации

Страница: 347 / 584

324
Overview of Temperature Input Units Section 7-2
4. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
5. Click the OK Button and exit the window.
Selecting I/O Data for
Allocation
Use one of the following methods to select data for allocation and then per-
form remote I/O communications.
1,2,3... 1. Allocating only the temperature input values (default I/O data)
2. Allocating selected I/O data patterns (fixed I/O data combinations)
■
Allocating Only the Temperature Input Values
When using the Temperature Input Unit's default settings, only the tempera-
ture input values are selected as I/O data and allocated in the four words
(eight bytes) of the Master Unit's Input Area, as shown in the following dia-
gram.
If the 1/100 Display Mode is set for the temperature input value with the CX-
Integrator, eight words (sixteen bytes) will be allocated in the Master's Input
Area, as shown in the following diagram.
15 0
Temperature Input Value for Input 0
Temperature Input Value for Input 1
Temperature Input Value for Input 2
Temperature Input Value for Input 3
15 0
Temperature Input Value for Input 0, Lower Word
Temperature Input Value for Input 0, Upper Word
Temperature Input Value for Input 1, Lower Word
Temperature Input Value for Input 1, Upper Word
Temperature Input Value for Input 2, Lower Word
Temperature Input Value for Input 2, Upper Word
Temperature Input Value for Input 3, Lower Word
Temperature Input Value for Input 3, Upper Word