Omron CRT1 - 10-2008, Руководство по эксплуатации

Страница: 438 / 584

415
Word Slave Unit and Bit Slave Unit Functions Section 11-3
Settings Using the CX-Integrator
1,2,3... 1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select
Parameters - Edit from the pop-up menu.)
3. Click the IN Tab.
4. Double-click the I/O Comment column for the terminal to be set. The Edit
Terminal Window will be displayed. Select Count for the Detection Mode,
enter the monitor value, and then click the OK Button.
5. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
6. Click the OK Button and exit the window.
11-3-5 Total ON Time Monitor
Description
This function totals the time that each input and output contact is ON (unit: s)
and stores this total time in the Slave Unit memory. (This data can be read
using the CX-Integrator or using explicit messages.)
A monitor value can be stored in the Slave Unit memory so once the set total
time has been reached, a flag in a status area in the Slave Unit turns ON to
notify the Master Unit. The notification details can be read using the CX-Inte-
grator or using explicit messages.