Omron CRT1 - 10-2008, Руководство по эксплуатации

Страница: 327 / 584

304
Analog Input Slave Units Section 6-4
6-4-2 I/O Data Allocation Methods
Allocating I/O Data
Use one of the following methods to select the data for allocating in the Mas-
ter Unit for remote I/O communications.
■
Default I/O Data
When using the Analog Input Slave Unit’s default settings, only the analog
input values are selected as the I/O data and allocated in the four words (eight
bytes) of the Master Unit’s input Area, as shown in the following diagram.
■
Allocating I/O Data Using the CX-Integrator
The analog data can be combined with other data, such as the Status Flags,
and allocated in the Master Unit. Select the required data from the CX-Inte-
grator drop-down menu.
Example: Allocating Analog Data + Top/Valley Detection Timing Flags in the
Master Unit.
Setting Using the CX-Integrator
1,2,3... 1. Turn ON the power to the CompoNet Slave Unit.
2. Double-click the icon of the Analog Input Unit to set in the Network Config-
uration Window to open the Configuration Window. (Alternatively, right-
click the icon and select
Parameters - Edit from the pop-up menu.)
15 0
Analog input value for Input 0
Analog input value for Input 1
Analog input value for Input 2
Analog input value for Input 3
15 8 7 0
Analog Data 1 for Input 0
Analog Data 1 for Input 1
Analog Data 1 for Input 2
Analog Data 1 for Input 3
Top Detection Timing Flag Valley Detection Timing Flag