Omron CP1L CPU UNIT - 03-2009, Руководство по эксплуатации

Страница: 517 / 810

483
DeviceNet I/O Link Units Section 7-7
CPM1A-DRT21 DeviceNet I/O Link Unit
(1) DeviceNet Communications Connector
Used to connect DeviceNet communications. For the wiring, use the con-
nector provided with the CPM1A-DRT21 or use a connector purchased
separately.
(2) Rotary Switches (SW2, SW3)
Used to set DeviceNet node numbers.
(3) DIP Switch (SW1)
Used to set the DeviceNet baud rate and the output hold function.
Number of I/O points 32 input points, 32 output points
Number of words allocated in
CPU Unit I/O memory 2 input words, 2 output words
(Allocated in the same way as other Expansion Units
and Expansion I/O Units.)
Node number setting Set using the rotary switches
(Set before turning ON the CPU Unit’s power supply.)
Communications current con-
sumption 48 mA
Baud rate setting (See note.)
Pin 1 Pin 2 Baud rate Max. transmission path
length
OFF OFF 125 kbps 500 m
ON OFF 250 kbps 250 m
OFF ON 500 kbps 100 m
ON ON Not allowed. ---
Output hold function setting
Pin 4 DeviceNet baud rate
OFF Clears remote outputs when communications error occurs. (Outputs
turned OFF for each logic value.)
ON Holds remote outputs when communications error occurs.
(1) DeviceNet Communications
Connector
(3) DIP Switch
(6) Expansion Connector
(4) LED Indicators
(2) Rotary Switches
(5) Expansion I/O Connecting Cable
Setting range: 0 to 63 (Do not set 64 to 99.)