![background image](http://html1.mh-extra.com/html/omron/cp1h-cpu-05-2006/cp1h-cpu-05-2006_operation-manual_742082545.webp)
514
Auxiliary Area Allocations by Function
Appendix C
PLC Setup Error Information
Interrupt Task Error Information
I/O Information
Name
Address
Description
Access
Updated
PLC Setup Error Flag
(non-fatal error)
A402.10
ON when there is a setting error in the PLC Setup.
Read-only
PLC Setup Error Location
A406
When there is a setting error in the PLC Setup, the loca-
tion of that error is written to A406 in 4-digit hexadecimal.
Read-only
Name
Address
Description
Access
Updated
Interrupt Task Error Flag
(non-fatal error)
A402.13
ON when the Detect Interrupt Task Errors setting in the
PLC Setup is set to “Detect” and an interrupt task is exe-
cuted for more than 10 ms during I/O refreshing of a
Special I/O Unit.
This flag will also be turned ON if an attempt is made to
refresh a Special I/O Unit’s I/O from an interrupt task with
IORF(097) while the Unit’s I/O is being updated by cyclic
I/O refreshing (duplicate refreshing).
Read-only
Interrupt Task Error Cause
Flag
A426.15
When A402.13 (the Interrupt Task Error Flag) is ON, this
flag indicates the cause of the error.
Read-only
Interrupt Task Error, Task
Number
A426.00 to
A426.11
When A402.13 (the Interrupt Task Error Flag) is ON, con-
tains the unit number of the Special I/O Unit for which
duplicate refreshing was executed.
Read-only
Name
Address
Description
Access
Updated
Too Many I/O Points Flag
(fatal error)
A401.11
ON when the number of CPM1A Expansion Units and
Expansion I/O Units exceeds the limit, when the number
of words allocated to these Units exceeds the limit, or
when too many CJ-series Units are mounted.
Read-only
Too Many I/O Points, Details A407.00 to
A407.12
Always 0000 hex.
Read-only
Too Many I/O Points, Cause
A407.13 to
A407.15
The 3-digit binary value of these bits indicates the cause
of the Too Many I/O Points Error.
010: Too many CPM1A words
011: Too many CPM1A Units
111: Too many CJ-series Units
Read-only
I/O Bus Error Flag
(fatal error)
A401.14
ON in the following cases:
• When an error occurs in a data transfer between the
CPU Unit and a CPM1A Expansion Unit or Expansion
I/O Unit. If this happens, 0A0A hex will be output to
A404.
• When an error occurs in a data transfer between the
CPU Unit and a CJ-series Unit. If this happens, 0000
hex will be output to A404 to indicate the first Unit,
0001 hex to indicate the second Unit, and 0F0F hex to
indicate an undetermined Unit.
• When the End Cover is not attached to the last CJ-
series Unit. If this happens, 0E0E hex will be output to
A404.
CPU Unit operation will stop and the ERR/ALM indicator
on the front of the CPU Unit will light.
(This flag will be turned OFF when the error is cleared.)
Read-only
I/O Bus Error Slot Number
A404
Contains information on I/O bus errors.
The CPU Unit will stop operating and the ERR/ALM indi-
cator on the front of the CPU Unit will light.
(A401.04 (I/O Bus Error Flag) will turn ON.)
(This information will be cleared when the error is
cleared.)
0A0A hex: CPM1A Unit error
0000 hex: CJ-series Unit error, 1st Unit
0001 hex: CJ-series Unit error, 2nd Unit
0F0F hex: CJ-series Unit error, unknown Unit
0E0E hex: CJ-series Unit error, no End cover
Read-only
Содержание CP1H-CPU - 05-2006
