Omron CP1H-CPU - 05-2006, Руководство по эксплуатации

Страница: 472 / 669

441
CompoBus/S I/O Link Units
Section 7-6
Operating Procedure
Connecting the
CompoBus/S I/O Link Unit CompoBus/S I/O Link Units are connected to the CP1H CPU Unit. Up to
seven Units can be connected, including any other Expansion Units and
Expansion I/O Units that are also connected. The Units can be connected in
any order from the CPU Unit.
I/O Allocation
I/O words are allocated to the CompoBus/S I/O Link Unit in the same way as
to other Expansion Units and Expansion I/O Units, i.e., the next available input
and output words are allocated. As shown below, when “m” is the last allo-
cated input word and “n” is the last allocated output word, the CompoBus/S I/
O Link Unit is allocated “m+1” as its input word and “n+1” as its output word.
In the following example, a CompoBus/S I/O Link Unit is connected as the first
Unit after the CP1H CPU Unit.
Connect the Unit.
Determine the node
address of the
CompoBus/S I/O Link Unit
and set the DIP switch.
Wire the CompoBus/S
transmission path.
•
Connect the CompoBus/S I/O Link Unit.
•
The node number should be a unique number between
0 and 15.
•
Use the DIP switch to set the CompoBus/S I/O Link
Unit fs node number, communications mode, and the
status of output data when a communications error
occurs.
•
Connect the CompoBus/S I/O Link Unit to a
CompoBus/S transmission path.
CPU Unit CompoBus/S I/O Link Unit
BD L NC( BS-) N C
BD H NC( BS+)
S
COMM
ERR
ON
1 2 3 4 5 6
No.
SRT21
EXP
Word m+1
CompoBus/S I/O Link Unit
8 inputs
8 outputs
Word n+1
CP1H
CPU Unit CompoBus/S
I/O LInk Unit
Input words
Output words
CIO 0
CIO 1
CIO 100
CIO 101
CIO 2
CIO 102