Oki BV1250, Руководство по установке

Страница: 47 / 344

Oki BV1250 Version 2 Installation Guide NETWORK WORKSHEETS
Revision 1.0 Page 37 of 334
3.2.3 Physical Configuration Worksheet
Use the Physical Configuration worksheet to record physical installation
information for each network unit to be installed. This information is
needed by the unit installer to install unit options and cabling.
A reproduction master for this worksheet is included in Appendix J: of this
document.
BV1250 Network Units Physical Configuration Worksheet
Unit
Name
Line Interface
(AP, E&M, E&M-OD or
FXO)
Mounting
(Desktop or
Rack)
E&M/E&M-OD Port Configuration
(2-Wire or 4-Wire,
Type-1, Type 2, or Type 5/OD)
2W 4W T1 T2 T5/OD
Unit 1 E&M Rack
3 3
Unit 2 E&M Rack 3 3
Unit 3 E&M Rack 3 3
Unit 4 E&M Rack 3 3
Unit 5 AP Desktop
Unit 6 FXO Desktop
Unit 7 FXO Desktop
Unit 8 AP Rack
Unit 9 FXO Rack
Unit 10 FXO Rack
Unit Name
Use the Unit Name to record a name to be associated with each
network unit (i.e. Gateway) in the Maintenance Console Software.
Although the Maintenance Console Software requires this information
before a unit can be defined and configured, it is used for unit
identification only and is not recorded in the unit’s configuration file
(OFDD.VHO).
The Unit Name field allows for the entry of an unrestricted
alphanumeric string.
In the sample worksheet the unit names are simply numbered, e.g.
Unit 1, Unit 2, etc.
This information can be transferred from the Network Units List
Worksheet.