Oki BV1250, Руководство по установке

Страница: 223 / 344

Oki BV1250 Installation Guide LOGICAL INSTALLATION
Revision 1.0 Page 213 of 334
PAD In Use the pull-down list to select the PAD value (in dB) to be
applied to voice signals coming into the unit.
It is usually best to use the default value for this field until it is
determined by observation, that adjustments are required.
PAD Out
Use the pull-down list to select the PAD value (in dB) to be
applied to voice signals going out from the unit.
It is usually best to use the default value for this field until it is
determined by observation, that adjustments are required.
DTMF detect
Use the pull-down list to select the DTMF detection method to be
used by the unit; No(ne), Incoming, Outgoing, or Both.
It is recommended that this be set to Outgoing.
AGC
To enable the unit's Automatic Gain Control, check the AGC
check box and configure the AGC sensitivity using the scroll box
to change the AGC dB value.
It is recommended that the PAD In value be set to 0 dBm when
using this feature.
Complete the fields listed above for each active port on the unit.
If a port on the unit is inactive, select the port in the Port parameters
list and click on the Clear button to logically disable the port.
If this is not done, calls can be lost because they are erroneously
routed to an inactive port.