Oki BV1250, Руководство по установке

Страница: 40 / 344

PLANNING Oki BV1250 Installation Guide
Revision 1.0 Page 30 of 334
3.2 Worksheets
Because the BV1250 is designed to accommodate a variety of network scenarios,
a wide range of parameters can be configured. Although in simpler installations,
the default settings will often be sufficient, some applications may require that
specific parameters be adjusted to match existing network interfaces.
Whether the installation is simple or more complex, configuration information
needs to be on-hand once the installation of a BV1250 unit begins. This
information should be determined during the network planning process.
At a minimum, IP addressing, telephone network, and telephone numbering plans
must be provided. Additionally, Network, PBX, and PSTN interface parameters
may be needed. Finally, information about special features to be implemented will
need to be prepared.
The worksheets described in this section are designed to assist in the network
planning process and should be filled-out before beginning physical and logical
installation. To make the process easier, they employ a top-down strategy, follow
a recommended order of operations, and conform to the Maintenance Console
Software’s interface.
Determining the information to be recorded on these worksheets requires a
specific knowledge of any existing network, existing Key Telephone Systems
and/or PBX telephone systems, and a thorough knowledge of IP network
addressing methods and telephone numbering systems.
Data from the Sample Network Diagram illustrated in Figure 3-3 of this document
are included. Where applicable, field defaults and applied values are indicated in
the text by an underscore. Sample network IP addressing and telephone numbering
examples are illustrated in appendices B and C.
Reproduction masters for the worksheets can be found in Appendix J: