Oki BV1250, Руководство по установке

Страница: 268 / 344

LOGICAL INSTALLATION Oki BV1250 Installation Guide
Page 258 of 334 Revision 1.0
5.11 Synchronize Unit Time and Date
If a unit is disconnected from a power source for two or more months,
battery discharge may result in the loss of the unit’s clock synchronization.
This condition can produce alarm indications that do not affect the
operation of the unit, but should be corrected using the following
procedure.
The Time sync item on the Unit menu is used to synchronize the BV1250
unit’s time and date with the time and date setting of the computer terminal
with which the unit is connected.
To update the time and date settings for one or more units:
1. Check that the time and date setting for the computer terminal is correct and
reset the time if necessary.
2. Select the Time Sync command from the Unit menu.
3. The MCS displays a Time sync unit selection list..
4. If necessary, mouse-click on a Unit Name in the list box to select or deselect it
for synchronization.
5. Click the Execute button to proceed with the update. Click on the Cancel
button to abort the process.
The MCS displays a message box showing the progress of the update and then
displays a results list indicating if the process was successful for each of the
selected units.