Oki BV1250, Руководство по установке

Страница: 327 / 344

Oki BV1250 Installation Guide APPENDICES
Revision 1.0 Page 317 of 334
3. At the FTP prompt, type the CD command to return to the BV1250
unit’s root directory.
ftp> cd ..
The FTP terminal displays a confirmation of the directory change.
250 CWD command successful.
4. To access the DNS.DAT file directory type following command at
the FTP prompt and press the Enter key.
ftp> cd ETC
The FTP terminal displays a confirmation of the directory change.
250 CWD command successful.
5. At the FTP prompt, type the PUT command and press the Enter key
to write the DNS.DAT file to the BV1250 unit.
ftp> put DNS.DAT DNS.DAT
200 PORT command successful.
150 Opening ASCII mode data connection
for DNS.DAT.
226 Transfer complete.
ftp: 62 bytes sent in 0.00Seconds
62000.00Kbytes/sec.
6. To end the FTP session and return to the Windows DOS prompt,
type the BYE command following command and press the Enter
key.
ftp> bye
221 Goodbye.
C:\>
7. Type
EXIT
at the C: prompt to end the Windows DOS session.
Use the shutdown procedure described in Section 4.9 and then restart the
unit to have the new configuration settings take effect in the target unit.