NF FRA51615, Инструкция по эксплуатации

Страница: 72 / 306

3.4 Operation tree
3
-
34
FRA 51615
(Marker operation keys)
ACTIVE
key : Toggle between the types of measurement data for marking
⊿
SET
key : Toggle the delta marker set state
⊿
SET
lamp : Lit when the delta marker set state is on
(Keypad)
0
to
9
, and
.
keys : Numerical and decimal point keys
−
key : Minus key
EXP
key : Exponent (power of 10)
BS
key : Backspace
＜
and
＞
keys : Cursor movement
Top menu 1/2
【
OSC
】
: {oscillator setting dialog }
[FREQUENCY]
: Set the frequency
[AMPLITUDE]
: Set the AC amplitude
[DC BIAS]
: Set the DC bias
[OUTPUT CONNECTOR]
: Set the DC bias output connector
[ON/OFF SYNC]
: Set measurement synchronization to on or off
[ON/OFF MODE]
: Set the mode to on or off
[STOP MODE]
: Set the oscillation stop phase
[WAVEFORM]
: Select the waveform
[10MHz REF]
: Set the reference clock
[IN]
: Set the reference clock input
[OUT]
: Set the reference clock output
[AMPLITUDE COMPRESSION > ]
: {amplitude compression function}
[FUNCTION]
: Set enabled or disabled
[REF CHANNEL]
: Select the monitoring channel
[REF LEVEL]
: Set the target amplitude
[OUTPUT LIMIT]
: Set the output limit
[TOLERANCE]
: Set the permissible error
[RETRY TIMES]
: Set the maximum number of retries
[CORRECTION FACTOR]
: Set the control sensitivity