NF FRA51615, Инструкция по эксплуатации

Страница: 262 / 306

8.5 Performance test
8-12
FRA 51615
8.5.8 Analyzer dynamic range
This instrument : Set the oscillator AC amplitude to 10 Vpk and the sweep frequency to from
10 Hz to 15 MHz.
Set the number of integrations to 300 cycles and the analysis mode to
CH2/CH1.
Measuring instrument : (none)
Connections : Connect the BNC short plug to the
CH1
connector. Connect the
OUTPUT OSC
to
CH2
.
Measurement method : Perform upsweep measurements with the instrument, and read the
minimum gain values in the ranges from 10 Hz or more up to 1 MHz and
from 1 MHz or more to 15 MHz from the LCD screen.
After completing the measurements, change to the connections for
measuring the dynamic range of CH2 and set the analysis mode to
CH1/CH2. Perform a sweep measurement and read the minimum gain
values for each range from the LCD screen.
Connections for measuring the dynamic Connections for measuring the dynamic
range of CH1 range of CH2
Judgement
Connections
Analysis
mode Frequency range
Minimum
measurement
value Passing range
*1
CH1
dynamic range
CH2/CH1
10 Hz
≦
f < 1 MHz
_ _ _. _ dB 140.0 dB or more
1 MHz
≦
f
≦
15 MHz _ _ _. _ dB 80.0 dB or more
CH2
dynamic range
CH1/CH2
10 Hz
≦
f < 1 MHz
_ _ _. _ dB 140.0 dB or more
1 MHz
≦
f
≦
15 MHz
_ _ _. _ dB 80.0 dB or more
*1: This value may not be satisfied due to the effects of electromagnetic noise in the environment or
other such factors. However, the test will be passed if most of the data that results from the sweep
measurement does satisfy the value.
OSC CH1 CH2
FRA 51615
BNC-BNC
Coaxial cable
BNC short plug
OSC CH1 CH2
FRA 51615