NF FRA51615, Инструкция по эксплуатации

Страница: 27 / 306

2.1 Inspection
2
-
3
FRA 51615
PC-001-4503 High withstand voltage BNC adapter (T-branch)
A high withstand voltage BNC adapter that can be used for 600 V CAT II or 300 V CAT III.
PA-001-0419 High withstand voltage clip cable set (3 per set)
A high withstand voltage clip cable (1m) that can be used for 600 V CAT II or 300 V CAT III.
PA-001-0421 High withstand voltage alligator clip cable set (large) (3 per set)
A set of three high withstand voltage alligator clip cables (1m) that can be used for 600 V CAT II
or 300 V CAT III.
PC-007-0364 High withstand voltage extension BNC cable
A high withstand voltage BNC extension cable (1 m) that can be used for 600 V CAT II or 300 V
CAT III.
PA-001-3058 HIGH WITHSTAND VOLTAGE BNC EXTENSION CABLE SET (15 cm, 3 CABLES)
A set of three high withstand voltage BNC extension cables (15 cm) that can be used for 600 V
CAT II or 300 V CAT III.
The following optional accessories have restrictions concerning the circuits for which safe measurement
as possible when used together with this instrument.
PA-001-0420 High withstand voltage alligator clip cable set (small) (3 per set)
A set of three high withstand voltage small alligator clip cables (1m) that can be used for 300 V
CAT II or less.
The following optional accessories are restricted to circuits that have no MEASUREMENT CATEGORY
and 42 Vpk or less for safe measurement when used together with this instrument.
5055 SIGNAL INJECTOR / PROBE
A probe for servo loop measurements of circuits (limit to 11 V) that have low stray capacitance.
PA-001-0368 IMPEDANCE MEASUREMENT ADAPTER
An adapter for use in measuring the impedance of electronic components, etc.
To protect the BNC connector of the instrument, use of the "
PA-001-3058 HIGH WITHSTAND
VOLTAGE BNC EXTENSION CABLES SET (15 cm, 3 CABLES SET)
" for connection is
recommended.
PA-001-0369 LOOP GAIN MEASUREMENT ADAPTER
An adapter that simplifies wiring connections for servo loop measurements.
To protect the BNC connector of the instrument, use of the "
PA-001-3058 HIGH WITHSTAND
VOLTAGE BNC EXTENSION CABLES SET (15 cm, 3 CABLES SET)
" for connection is
recommended.
PA-001-1838 TEST FIXTURE ADAPTER (1 ohm)
PA-001-1839 TEST FIXTURE ADAPTER (100 ohm)
An adapter for connecting to various LCR meter test fixtures for measuring the impedance of
electronic components.
PA-001-0422 Alligator clip cable set (3 per set)