Motoman SK300X, Руководство пользователя

Страница: 124 / 553

9.2 Notes on Maintenance Procedures
9-9
The new grease can be distinguished from the old grease by color.
4. Wipe the So exhaust port with a cloth and reinstall the plug.(Spread the Modifier silicon
Caulk on the screw of the plug.)
9.2.3
Grease Replenishment/Replacement for L and U-Axis
Speed Reducer
Fig. 23 L-Axis and U-Axis Speed Reducer Diagram
n
Grease Replenishment (Refer to " Fig. 23 L-Axis and U-Axis Speed
Reducer Diagram ".)
1. Remove the Lo and Uo exhaust plugs.
2. Inject grease into the Li and Ui grease inlet using a grease gun.
3. Move the L- and U-Axis for a few minutes to discharge the excess grease.
4. Wipe the Lo and Uo exhaust plugs with a cloth and reinstall the plugs.(Spread the
Modifier silicon Caulk on the screw of the plug.)
If the plug is installed when the grease is being exhausted, the grease will go inside the
motor and may damage it.
If grease is added without removing the exhaust plugs, the grease will go inside the motor
and may damage it. It is absolutely necessary to remove the plugs.
Grease type: Molywhite RE No.00
Amount of grease: 600cc
(1200cc for 1st supply)
N OT E
N OT E