manualshive.com logo in svg

Motoman SK300X, Руководство пользователя, Страница: 39 / 553

Поделиться
Скачать
Motoman SK300X Скачать руководство пользователя страница 39

1.6  Notes for Moving and Transferring the MOTOMAN

1-14

1.6

Notes for Moving and Transferring the MOTOMAN

When moving or transferring the Motoman,  observe the following safety precautions:

• Attach the instructions to the controller cabinet so that all users have 

access to necessary manuals.  See Section 1.3 for a complete list of 
manuals.

If any manuals are missing, contact your Yaskawa representative. 

• If the warning labels on the manipulator and YASNAC XRC are illegible, 

clean the labels so that they can be read clearly. Note that some local 
laws may prohibit equipment operation if safety labels are not in place.

Contact your YASKAWA representative if you require new warning labels.

• When the MOTOMAN is transferred,  it is recommended to check with 

Yaskawa Engineering Co. which is listed on back cover of this manual.

Incorrect installation or wiring may result in personal injury and property damage.

• Never modify the manipulator or XRC.

Failure to observe this precaution could result in injury or damage resulting from fire, 
power failure, or operation error.

Содержание SK300X










































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов