manualshive.com logo in svg

Molecular Devices AquaMax 2000, Руководство пользователя

Поделиться
Скачать
Molecular Devices AquaMax 2000 Скачать руководство пользователя страница 96

AquaMax

®

 2000/4000 Microplate Washer User Guide

96 

0112-0151 K 

System Fluidics Issues

Table 6-2: 

System Fluidics Issues 

Problem

Possible Causes & Remedies

Air in the bottle lines.

Prime lines using the one-touch Prime 
program.

Leaks from the liquid inlet 
quick connects on the left side 
of the washer.

When the bottle tubing is disconnected from 
the quick-connect, it is normal for a small 
amount of liquid to leak from the inlets.

The prime trough does not 
drain and is filled with liquid.

Manually purge the trough by touching Purge 
in the Options tab. This will also empty the 
wash head.

Liquid under instrument.

If the overflow drain (see 

Figure 6-1

) is full or 

wet, and liquid is overflowing from the 
prime/soak trough:

•

Verify that the total dispense volume in 
the program does not exceed the 
maximum well volume for the plate in 
use.

•

Adjust the dispense accuracy, see 

To 

adjust dispense accuracy for a program on 
page 68

.

•

Remove any blockage in the prime/soak 
trough.

If the overflow drain is completely dry: 

•

Check around the instrument for other 
sources of leaks, such as the tubing 
connectors from the bottles.

•

If the leakage is coming from within the 
instrument, contact Technical Support.

Note: 

A small amount of liquid will not 

cause damage to the instrument. If the 
trough is full, manually purge the trough 
by touching Purge in the Options tab. 
Carefully wipe up any spills under the 
instrument.

Содержание AquaMax 2000































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды