Molecular Devices AquaMax 2000, Руководство пользователя

Страница: 59 / 158

Operation: The Touch Screen Interface
0112-0151 K 59
Standby Settings
Use Standby mode to keep wash fluid in the head without the need to
prime the head if there is a delay between uses.
The Standby step fills the prime/soak trough with a wash fluid and leaves
the dispense/aspirate probes in the wash fluid.
You can use the touch screen buttons to select the source bottle for the
wash fluid and to program the wash fluid to automatically change at
specific time intervals.
To discontinue the Standby step and continue using the AquaMax
Microplate Washer, touch Cancel. This drains the trough and dispenses a
small amount of the wash fluid through the dispense needles.
Table 4-19: Standby settings
Item Description
1 Inlet–Liquid to be used for this step.
The available options correspond to the color-coded reagents
connected to the washer.
2 Prompt–Indicates that the system will pause before dispensing and
wait for the user to specify an inlet.
3 Change solution every–Drains and refills the solution in the soaking
trough at the specified refresh interval.
1
3
2