Mocom millennium B, Руководство по обслуживанию, Страница: 67 / 285

Rev.1
Page 1-
63
1
2
3
1
2
3
Replace bacteriological filter
When it is due to be changed, or when you notice visible clogging of the filter (indicated by a color markedly tending towards gray) unscrew the
bacteriological filter from its support and replace it with a new one by screwing it all the way down on the connector on the front of the machine.
e
A replacement bacteriological filter is supplied with the device.
Replace the printer paper
To replace a used-up printer paper roll:
1. open the service compartment door to access the printer,
2. push the central button (2) to open the printer door and access the paper compartment,
3. remove the empty roll and place a new one so that the paper unrolls off the top;
use thermal paper roll:
- width 57 mm / diameter max 45 mm
4. unroll about 15 cm of paper and close the printer door,
5. thread the paper in the slot of the service compartment and close.
e
The central button is lighted steady when the paper is regularly present, and is flashing when the paper rool is empty
1. open the service compartment door to access the printer,
2. push the button on the left to access the paper compartment,
3. remove the empty roll and place a new one so that the paper unrolls off the top;
use thermal paper roll:
- width 57 mm / diameter max 45 mm
4.
unroll about 15 cm of paper and close the printer door (the paper will automatically advance a few centimeters outside the window),
5. thread the paper in the slot of the service compartment and close.
Printer type 1
Printer type 2