Mocom millennium B, Руководство по обслуживанию, Страница: 53 / 285

Rev.1
Page 1-
49
EXIT THE SETUP MODE
Completed the sterilizer configuration, proceed as follows to return in normal mode::
– Go to the first-level menu (see SETUP layout ).
e
To return to the first level from any current menu level, just select item EXIT of the current menu and confirm by
↵
key.
Alternatively, you can press
↑
(ESC) key one or more times.
– Select EXIT and confirm with the
↵
key. This text appears on the display:
M I L L E N N I U M B
S E T U P C O M P L E T E
↵ t o e x i t
t o r e s u m e
After several seconds, the device returns to normal operation in STAND-BY mode.
DEFAULT SETTING
The sterilizer leaves the factory with the following settings:
DATE : current date
TIME : current time
PROGRAMMES : Preset 1 : 134°C POROUS ( standard drying)
Preset 2 : 134°C HOLLOW ( standard drying)
Preset 3 : 134°C SOLID ( standard drying)
Preset 4 : 134°C EMERGENCY
e
The programs indicated should be considered as preferential settings. However, other combinations are possible based on the
destination market.
ST-BY MODE : HIGH (pre-heating)
PRINT OPTIONS : OFF (1 copy)
FILLING OPTIONS : MANUAL
DRAIN OPTIONS: INTERNAL