Mitsubishi Electric FR-F700PJ Series, Инструкция по эксплуатации

Страница: 52 / 356

39
Connection of stand-alone option unit
2
WIRING
2.4.4 Connection of the power regeneration common converter (FR-CV)
When connecting the power regeneration common converter (FR-CV), connect the inverter terminals (P/+ and N/-) and power
regeneration common converter (FR-CV) terminals as shown below so that their symbols match with each other.

Do not connect anything to the input terminals (R/L1, S/L2, T/L3). Incorrect connection will damage the inverter.

Do not insert an MCCB between the terminals P/+ and N/- (between P/L+ and P/+, between N/L- and N/-). Opposite polarity of terminals
N/- and P/+ will damage the inverter.

Always connect the power supply and terminals R/L11, S/L21, T/MC1.
Operating the inverter without connecting them will damage the power regeneration common converter.

Use Pr. 178 to Pr. 182 (input terminal function selection) to assign the terminals used for the X10 and RES signals. (Refer to page 134)

Be sure to connect terminal RDYB of the FR-CV to the X10 signal or MRS signal assigned terminal of the inverter, and connect terminal
SE of the FR-CV to terminal SD of the inverter. Without proper connecting, FR-CV will be damaged.
NOTE
 The voltage phases of the FR-CV terminals R/L11, S/L21, and T/MC1 and the voltage phases of the inverter terminals
R2/L1, S2/L2, and T2/L3 must be matched.
 Use sink logic (initial setting) when the FR-CV is connected. The FR-CV cannot be connected when source logic is
selected.
 Do not connect a DC reactor (FR-HEL) to the inverter when FR-CV is connected.
 Filterpack connection is not available when FR-CV is connected.
Parameters referred to
Pr. 30 Regenerative function selection Refer to page 131
R/L
11
Dedicated stand-alone
reactor (FR-CVL)
S/L
21
T/L
31
R2/L
12
S2/L
22
T2/L
32
R2/L 1
S2/L 2
T2/L
3
R/L
11
S/L
21
T/MC1
P/L+
U
V
W
M
FR-CV type power
regeneration common converter
Inverter
PC
SD
X10
RES
SD
P24
SD
RDYB
RSO
SE
RDYA
N/L-
*4
*5
*2
*4
*3
R/L1
S/L2
T/L3
P/+
N/-
*1
Three-phase
AC power supply
MCCB MC 1