Mitsubishi Electric FR-F700PJ Series, Инструкция по эксплуатации

Страница: 350 / 356

345

Not available under the IPM motor control.

Rated power consumption.The power supply specifications of the FR series manual controllers and speed controllers are 200VAC 50Hz, 220/220VAC 60Hz,
and 115VAC 60Hz.
Commercially available products
(as of Feb. 2012)
Blade terminal
 Phoenix Contact Co.,Ltd.

NICHIFU Co.,Ltd.
Contact the manufacturer regarding the delivery schedule, price, specifications, and other information of the products listed here.

A blade terminal with a insulation sleeve compatible with MTW wire which has a thick wire insulation.

Applicable for the terminal ABC.
FR Se
ri
es
M
a
nua
l Con
tr
o
lle
r/S
pe
ed c
ont
ro
ller
Manual controller FR-AX
For independent operation. With frequency meter, frequency
potentiometer and start switch.
Applicable for all
models
DC tach. follower FR-AL
For synchronous operation (1.5VA) by external signal (0 to 5V,
0 to 10V DC)

Three speed selector FR-AT
For three speed switching, among high, middle and low speed
operation (1.5VA)

Motorized speed setter FR-FK
For remote operation. Allows operation to be controlled from
several places (5VA)

Ratio setter FR-FH For ratio operation. The ratios of five inverters can be set (3VA)

Speed detector FR-FP For tracking operation by a pilot generator (PG) signal (3VA)

Master controller FR-FG
Master controller (5VA) for parallel operation of multiple
(maximum 35) inverters.

Soft starter FR-FC
For soft start and stop. Enables acceleration/deceleration in
parallel operation (3VA)

Deviation detector FR-FD
For continuous speed control operation. Used in combination
with a deviation sensor or synchro (5VA)

Preamplifier FR-FA Used as an A/V converter or arithmetic amplifier (3VA)

Othe
rs
Pilot generator QVAH-10 For tracking operation. 70V/35VAC 500Hz (at 2500r/min)
Deviation sensor YVGC-500W-NS
For continuous speed control operation (mechanical deviation
detection)
Output 90VAC/90
Frequency setting
potentiometer
WA2W 1k

For frequency setting. Wire-wound 2W 1k

type B
characteristic
Frequency meter (64mm

60mm)
YM206NRI 1mA
Dedicated frequency meter (graduated to 120Hz). Moving-coil
type DC ammeter
Calibration resistor RV24YN 10k

For frequency meter calibration. Carbon film type B characteristic
Name Model Manufacturer Structure, Specifications, etc.
Communication connector
5-554720-3
Tyco Electronics
Corporation
RJ-45 connector
Communication cable
SGLPEV-T
(Cat5e/300m)
24AWG

4
Mitsubishi Cable
Industries, Ltd.
Cat.5e cable that is compatible with TIA/EIA standards.
(10BASE-T/100BASE-T/1000BASE-T)
Flathead screwdriver
SZF 0-0,4

25
Phoenix Contact Co.,
Ltd.
A flathead screwdriver suitable to push the open/close button
when wiring to the control circuit.
Cable Size
(mm
2
)
Blade Terminal Model
Blade Terminal
Crimping Tool
with insulation sleeve
without
insulation sleeve
for UL wire

0.3 AI 0,5-10WH ------ ------
CRIMPFOX 6
0.5 AI 0,5-10WH ------ AI 0,5-10WH-GB
0.75 AI 0,75-10GY A 0,75-10 AI 0,75-10GY-GB
1 AI 1-10RD A 1-10 AI 1-10RD/1000GB
1.25, 1.5 AI 1,5-10BK A 1,5-10 AI 1,5-10BK/1000GB

0.75 (for two
cables)
AI-TWIN 2

0,75-10GY ------ ------
Cable Size (mm
2
)
Blade Terminal Product
Number
Insulation
Product Number
Blade Terminal
Crimping Tool
0.3 to 0.75 BT 0.75-11 VC 0.75 NH 69
Name Model Applications, Specifications, etc.
Applicable
Inverter