LSIS 6731001500, Руководство пользователя

Страница: 93 / 659

80
Learning Basic Features
4 Learning Basic Features
This chapter describes the basic features of the H100 inverter. Check the reference page in the
table to see the detailed description for each of the advanced features.
Basic Tasks Description Ref.
Operation mode selection
(HAND / AUTO / OFF)
Used to select the operation mode.
p.83
Frequency reference source
configuration for the keypad Configures the inverter to allow you to setup or modify a
frequency reference using the Keypad.
p.88
Frequency reference source
configuration for the
terminal block (input
voltage)
Configures the inverter to allow input voltages at the
terminal block (V1, V2) and to setup or modify a frequency
reference.
p.89
p.99
Frequency reference source
configuration for the
terminal block (input
current)
Configures the inverter to allow input currents at the
terminal block (I2) and to setup or modify a frequency
reference.
p.96
Frequency reference source
configuration for the
terminal block (input pulse)
Configures the inverter to allow input pulse at the terminal
block (TI) and to setup or modify a frequency reference.
p.100
Frequency reference source
configuration for RS-485
communication Configures the inverter to allow communication signals
from upper level controllers, such as PLCs or PCs, and to
setup or modify a frequency reference.
p.102
Frequency control using
analog inputs Enables the user to hold a frequency using analog inputs
at terminals.
p.102
Motor operation display
options
Configures the display of motor operation values. Motor
operation is displayed either in frequency (Hz) or speed
(rpm).
p.102
Multi-step speed (frequency)
configuration Configures multi-step frequency operations by receiving
an input at the terminals defined for each step frequency.
p.104
Command source
configuration for keypad
buttons
Command source configuration for keypad buttons.
p.106
Command source
configuration for terminal Configures the inverter to accept inputs at the FX/RX
terminals.
p.107