LSIS 6731001500, Руководство пользователя

Страница: 361 / 659

348
Learning Protection Features
Main Capacitor Life Estimation Detail Settings
Code Description
PRT-83 CAP.
Diag Perc
Configure the current level of the inverter’s output when capacitance life
examination is in operation. For life examination, the value must be set higher than
0%.
PRT-84 CAP.
Diag
Configure the capacitance life examination mode. This mode is separated into
installing the inverter mode and maintenance mode. To use the capacitance life
examination function, proper setting is required.
Setting Function
0 None Do not use capacitance life examination function.
1 CAP. Diag 1
When installing the inverter for the first time,
estimate initial capacitance.
2 CAP. Diag 2 Estimate the capacitance while maintaining the
inverter.
3 CAP. Init Initialize the estimated value of the capacitance to 0.
PRT-85 CAP.
Level 1
Set the standard level for the capacitance replacement.
PRT-86 CAP.
Level 2
Display estimated capacitance value according to the mode in PRT-84. If this value
is lower than the value set in PRT-85, the warning message”CAP Warning” appears
on the display.
•
Be careful when replacing the battery. Remaining voltage in the battery may cause electric shock.
•
Make sure that the battery doesn’t fall inside of the inverter.
•
The main capacitor life examination is only for reference and cannot be used as an absolute
value.
•
The main capacitor life examination only operates in AUTO mode and when inverter is
stopped.