LSIS 6731001500, Руководство пользователя

Страница: 329 / 659

316
Learning Advanced Features
Output Terminal Delay Time Setting Details
5.49 Operation State Monitor
The inverter’s operation condition can be monitored using the keypad. If the monitoring option is
selected in config (CNF) mode, a maximum of four items can be monitored simultaneously.
Monitoring mode displays three different items on the keypad, but only one item can be
displayed in the status window at a time.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF
20
Display item condition
display window AnyTime
Para
0 Frequency - -
21
Monitor mode
display 1 Monitor
Line-1
0 Frequency - Hz
Code Description
OUT-50
DO On Delay When a relay operation signal (operation set in OUT 31–35, 36) occurs, the relay
turns on or the multi-function output operates after the time delay set at OUT-50.
OUT-51
DO Off Delay When relay or multi-function output is initialized (off signal occurs), the relay turns
off or multi-function output turns off after the time delay set at OUT-54.
OUT-52
DO NC/NO Sel
Select the terminal type for the relay and multi-function output terminal. By setting
the relevant bit to ‘0,’ it will operate A terminal (Normally Open). Setting it to ‘1’ will
operate B terminal (Normally Closed). Shown below in the table are Relay 1–5 and
Q1 settings starting from the right bit.
Item B terminal (Normal close) A terminal (Normal open)
Keypad
display