LSIS 6731001500, Руководство пользователя

Страница: 318 / 659

305
Learning Advanced Features
14 EPID Ref
Val
Output is based on the reference value of the external PID1
controller. Outputs 6.6 V in 100%.
15 EPID Fdb
Val
Output is based on the feedback amount of the external PID1
controller. Outputs 6.6 V in 100%.
OUT-02 AO1
Gain,
OUT-03 AO1
Bias
Adjusts output value and offset. If frequency is selected as an output item, it will
operate as shown below.
121
34567589:
;<=3456
121 ><?8 @ 121 A?<B
The graph below illustrates how the analog voltage output (AO1) changes
depending on OUT-02 (AO1 Gain) and OUT-3 (AO1 Bias) values. The Y-axis is analog
output voltage (0–10 V), and the X-axis is a % value of the output item.
Example, if the maximum frequency set at DRV-20 (Max Freq) is 60 Hz and the
present output frequency is 30 Hz, then the x-axis value on the next graph is 50%
.
OUT-04 AO1
Filter
Set filter time constant on analog output.
OUT-05 A01
Const % If the analog output at OUT-01 (AO1 Mode) is set to ’12 (Constant)’, the analog
voltage output is dependent on the set parameter values (0–100%).
OUT-06 AO1 Monitors the analog output value. Displays the maximum output voltage as a