LSIS 6731001500, Руководство пользователя

Страница: 326 / 659

313
Learning Advanced Features
•
FDT-1 and FDT-2 functions are related to the frequency setting of the inverter. If the inverter
enters standby mode by pressing the off key during auto mode operation, FDT-1 and FDT-2
function operation may be different because the set frequency of the inverter is different
compared to the set frequency of the auto mode.
26 On/Off Control Outputs a signal using an analog input value as a
standard.
Refer to 5.45 Multi-function Output On/Off Control on
page 259 .
27 Fire Mode Outputs a signal when Fire mode is in operation.
28 Pipe Break Outputs a signal when a pipe is broken.
29 Damper Err Outputs a signal when damper open signal is not
entered. For more details, refer to 0
Damper
Operation on page
194.
30 Lubrication Outputs a signal when a lubrication function is in
operation.
31 PumpClean Sel Outputs a signal when a pump cleaning function is in
operation.
32 LDT Trip Outputs a signal when an LDT trip occurs.
33 Damper
Control Outputs a signal when a damper open signal is set at
IN-65–71 multi-function terminals and run command
is on.
34 CAP.Warning Outputs a signal when value of the PRT-85 is lower
than the value of the PRT-86 (CAP life cycle
examination do not operate properly).
35 Fan Exchange Outputs a signal when fan needs to be replaced.
36 AUTO State Outputs a signal in AUTO mode.
37 HAND State Outputs a signal in HAND mode.
38 TO Outputs a signal at pulse output.
39 Except Date Outputs a signal when operating the exception day
schedule.
40 KEB Operating Outputs a signal at KEB operation.
41
BrokenBelt Outputs a signal when a Broken belt is in operation.
OUT-36 Q1
Define Select an output item for the multi-function output terminal (Q1) of the terminal
block. Q1 stands for the open collector TR output.
OUT-41 DO
State
Used to check On/Off state of the D0 by each bit.