LSIS 6731001500, Руководство пользователя

Страница: 296 / 659

283
Learning Advanced Features
AP1-61
AP1-62
AP1-63
AP1-64
AP1-65
Max Freq
Inverter
Out Freq
AP1-70
AP1-71
AP1-72
Aux Motor 1
Aux Motor 2
Aux Motor 3
Aux Motor 4
Aux Motor 5
Feedback
AP1-70
AP1-71
AP1-72
Perform Aux_Exch
Reset the [Auto Op Time]
AP1-62
AP1-63
AP1-64
0%
100%
Fx
Off
On
Pr iority of the moment
M2
 M1  M3 /
M4

M5
Priority of the moment
M1
 M2  M3 /
M4  M5
Priority of the moment
M3
 M2  M1 /
M4  M5
Priority of the moment
M3
 M2  M1 /
M4

M5
5min
10min
AP1-61
Priority of the moment
M4
 M5  M3 /
M2  M1
30min Operation time
M1(30min) / M2(25min) /
M3(20min)
AP1-73
Priority of the moment
M4
 M5  M3 /
M2  M1
Motor to operate MMC : M1, M2, M3
Standby motor : M4, M5
Motor to operate MMC : M3, M4, M5
Standby motor : M1, M2
Supposing its operation in
less than 1 minute
AP1-74
AP1-72
AP1-65
Aux Auto Change operation (Op Time Order) when operable motor and standby motor are set to 3 and 2 each
Option 1: [AP1-58 Auto Op Time] >= [AP1-56: Auto Ch Time]
When
AP1-55 (Auto Ch Mode) is set to ‘2
(Main Exchange),’ the system uses all the motors (main and
auxiliary motors) regardless of the types. The auxiliary motor with the highest priority is operated
first and used as the main motor. Then, when the auto change conditions are met, this motor is
stopped and the motor priorities are re-arranged. This way, the system always operates the motor
with the highest priority and uses it as the main motor of the MMC operation. In this case, before
auto change is operated for the main motor, the interlock delay time set at AP1-91 (Interlock DT) is
applied.