LSIS 6731001500, Руководство пользователя

Страница: 73 / 659

Perform Basic Operations
60
Table of Display Modes
The following table lists the 5 display modes used to control the inverter functions.
Mode Name Keypad Display Description
Monitor mode MON
Displays the inverter’s operation status information. In this
mode, information including the inverter’s frequency
reference, operation frequency, output current, and voltage
may be monitored.
Parameter mode PAR
Used to configure the functions required to operate the
inverter. These functions are divided into 14 groups based
on purpose and complexity.
User & Macro
mode
U&M
Used to define User groups and Macro groups. These user-
definable groups allow specific functions of the inverter to
be grouped and managed in separate groups.
This mode is not displayed when you navigate through the
modes if no user groups or Macro groups have been
defined.
Trip mode TRP
Used to monitor the inverter’s fault trip information,
including the previous fault trip history.
When a fault trip occurs during inverter operation, the
operation frequency, output current, and output voltage of
the inverter at the time of the fault may be monitored.
This mode is not displayed if the inverter is not at fault and
fault trip history does not exist.
Config mode CNF
Used to configure the inverter features that are not directly
related to the operation of the inverter. The settings you
can configure in the Config mode include keypad display
language options, monitor mode environment settings,
communication module display settings, and parameter
duplication and initialization.