LSIS 6731001500, Руководство пользователя

Страница: 99 / 659

86
Learning Basic Features
Function Codes related to HAND/AUTO/OFF Operation Modes
Codes / Functions Description
DRV-01
Cmd Frequency
Frequency reference in AUTO mode when DRV-07 is set to’ KeyPad’.
DRV-02
KeyPad Run Dir Rotation direction of the keypad command in the HAND or AUTO mode.
Settings Description
0 Forward Fx operation
1 Reverse Rx operation
DRV-05
KPD H.O.A Lock To make HAND-OFF-AUTO enabled/disabled
Settings Description
0 Locked To make HAND-OFF-AUTO disabled and turn Auto mode
1 During
Run
If [DRV-06 Cmd Source] is Fx/Rx-1, Fx/Rx-2, Int485 or fieldbus,
HAND-OFF-AUTO is enabled only during working
3 Unlocked To make HAND-OFF-AUTO enabled
DRV-25
HAND Cmd Freq
Frequency displayed at the monitor display item (Monitor Line-1) when the
HAND key is pressed in other modes (default frequency reference for HAND
mode).
OUT-31–36
Relay 1–5
Set AUTO State (36) to ensure that the inverter is in AUTO mode.
OUT-31–36
Relay 1–5
Set HAND State (37) to ensure that the inverter is in HAND mode.
Switching between the HAND/AUTO/OFF Modes
Mode Description
AUTO HAND
Press the HAND key in AUTO mode to switch to HAND mode. The inverter
operates as follows based on the setting at DRV-26 (Hand Ref Mode).
Settings Description
0 Hand
Parameter
The inverter operates based on the operation direction set
at DRV-02 (Keypad Run Dir) and the frequency reference
HAND
OFF
AUTO
1
2
3
4
5
6