LSIS 6731001500, Руководство пользователя

Страница: 76 / 659

Perform Basic Operations
63
User & Macro Mode
Function Group Name Keypad Display Description
User USR
Used to put the frequently accessed function
parameters together into a group. User parameter
groups can be configured using the multi-function key
on the keypad.
Macro MCx
Provides different factory-preset groups of functions
based on the type of load.
Groups MC1, MC2, or MC3 is displayed when the user
selects the type of desired load. Macro groups can be
selected in CNF mode.
3.2 Learning to Use the Keypad
The keypad enables movement between groups and codes. It also enables users to select and
configure functions. At code level, you can set parameter values to turn specific functions on or off
or decide how the functions will be used. For detailed information on the codes in each function
group, refer to
8
Table of Functions
on page
415.
Confirm the correct values (or the correct range of
the values), then follow the examples below to configure the inverter with the keypad.
3.2.1 Display Mode Selection
The following figure illustrates how the display modes change when you press the [Mode] button
on the keypad. You can continue to press the [Mode] key until you get to the desired mode.