LSIS 6731001500, Руководство пользователя, Страница: 325 / 659

312
Learning Advanced Features
Outputs a signal when communication power is
present and an I/O expansion card is installed. It also
outputs a signal when losing analog input and
communication power commands.
14 RUN Outputs a signal when an operation command is
entered and the inverter outputs voltage.
No signal output during DC braking.
15 Stop Outputs a signal at operation command off, and when
there is no inverter output voltage.
16 Steady Outputs a signal in steady operation.
17 Inverter Line Outputs a signal while the motor is driven by the
inverter line.
18 Comm Line Outputs a signal when multi-function input terminal
(switching) is entered. For details, refer to
5.31Supply
Power Transition
page on
253.
19 Speed Search Outputs a signal during inverter speed search
operation.
For details, refer to
5.27Speed Search Operation
on page
243.
20 Ready Outputs a signal when the inverter is in stand by mode
and ready to receive external operation commands.
21 MMC Used as a multi-motor control function. By configuring
the relay output and the multi-function output to
MMC and configuring the AP1-40–AP1-92, it can
conduct the necessary operations for multi-motor
control function.
22 Timer Out A timer function to operate terminal output after a
certain time by using multi-function terminal block
input. For details, refer to 5.43
Timer
Settings on page
265.
23 Trip Outputs a signal after a fault trip.
Refer to 5.45 Multi-function Output On/Off Control on
page 259 .
25 DB Warn %ED Refer to 0. Dynamic Braking (DB) Resistor
Configuration on page 295.