LSIS 6731001500, Руководство пользователя, Страница: 171 / 659

158
Learning Advanced Features
5.5 Safe Operation Mode
When the multi-function terminals are configured to operate in safe mode, operation commands
can be entered in the Safe operation mode only. Safe operation mode is used to safely and
carefully control the inverter through the multi-function terminals.
Group Code Name LCD Display Parameter Setting
Setting
Range
Unit
ADV
70
Safe operation
selection
Run En Mode 1 DI Dependent 0-1 -
71
Safe operation
stop mode
Run Dis Stop 0 Free-Run 0–2 -
72
Safe operation
deceleration
time
Q-Stop Time 5.0 0.0–600.0 sec
IN 65–71
Px terminal
configuration Px Define(Px: P1–
P7)
15 RUN Enable 0-55 -
Safe Operation Mode Setting Details
Code Description
IN-65–71 Px Define
From the multi-function terminals, select a terminal to operate in safe
operation mode and set it to ‘15 (RUN Enable)’.
ADV-70 Run En
Mode
Setting Function
0 Always Enable Enables safe operation mode
1 DI Dependent Recognizes the operation command from a multi-
function input terminal.
ADV-71 Run Dis
Stop
Set the operation of the inverter when the multi-function input terminal in safe
operation mode is off.
When the safety operation mode terminal signal is given, the inverter
decelerates based on the settings at the Q-Stop time. The inverter decelerates
and stops based on the deceleration time (Dec Time) settings if the run
command is off.
Setting Function
1 Free-Run Blocks the inverter output when the multi-function
terminal is off.
2 Q-Stop The deceleration time (Q-Stop Time) used in safe