LSIS 6731001500, Руководство пользователя

Страница: 104 / 659

91
Learning Basic Features
Group Code Name LCD Display Parameter Setting Setting Range Unit
(%)
16
Rotation direction
options
V1 Inverting 0 No 0–1 -
17 V1 Quantizing level
V1
Quantizing
0.04
0.00*, 0.04–
10.00
%
* Quantizing is disabled if ‘0’ is selected.
Code Description
IN-01 Freq at 100%
Configures the frequency reference at the maximum input voltage when a
potentiometer is connected to the control terminal block. A frequency set with
code IN-01 becomes the maximum frequency only if the value set in code IN-11
(or IN-15) is 100 (%).
•
Set code IN-01 to 40.00 and use default values for codes IN-02–IN-16. Motor
will run at 40.00 Hz when a 10 V input is provided at V1.
•
Set code IN-11 to 50.00 and use default values for codes IN-01–IN-16. Motor
will run at 30.00 Hz (50% of the default maximum frequency–60 Hz) when
a 10 V input is provided at V1.
IN-05 V1 Monitor[V] Configures the inverter to monitor the input voltage at V1.
IN-07
V1 Filter
V1 Filter may be used when there are large variations between reference
frequencies. Variations can be mitigated by increasing the time constant, but
this requires an increased response time.
The value t (time) indicates the time required for the frequency to reach 63% of
the reference, when external input voltages are provided in multiple steps.
[V1 Filter ]
100%
63%
V1 Filter(t)
V1 input from
external source
Frequency