LSIS 6731001500, Руководство пользователя

Страница: 40 / 659

27
Installing
the Inverter
Step 1 Terminal Cover and Cable Guide
The terminal cover and cable guide must be removed to install cables. Refer to the following
procedures to remove the covers and cable guide. The steps to remove these parts may vary
depending on the inverter model.
1
Loosen the bolt that secures the terminal cover. Then remove the cover by lifting it from the
bottom and away from the front.
0.75–90 kW Models 110–185 kW Models 220–500 kW Models
2
Push and hold the levers on both sides of the cable guide (
❶
) and then remove the cable
guide by pulling it directly away from the front of the inverter (
❷
). In some models (37~90kW)
where the cable guide is secured by a bolt, remove the bolt first.
0.75~30 / 110~185 kW Models
3
Connect the cables to the power terminals and the control terminals. For cable specifications,
refer to
1.5 Cable Selection
on page
14
.
Step 2 Ground Connection