LSIS 6731001500, Руководство пользователя

Страница: 87 / 659

Perform Basic Operations
74
corner of the keypad display’s status bar, another frequency item is displayed. This item refers to
the frequency reference when the inverter is not operating and the output frequency when the
inverter is operating.
The following example shows how to configure the display items in HAND mode.
•
Monitor mode is displayed on the keypad. The output
frequency, output current, and output voltage are
displayed (factory default).
•
Go to the Config (CNF) mode. In the Config mode, codes
CNF-21–23 are used to select the three monitoring
display items. The currently selected display item and its
setting are highlighted.
•
To view the available display items and change the
setting for the third monitoring display item, press the
[Down] key to move to CNF-23 and press the [PROG/ENT]
key.
•
The currently selected display item for CNF-23 (Monitor
Line–3) is ‘Output Voltage.’
•
Press the [Up] or [Down] key to view the available display
items.
•
Move to ‘4 Output Power’ and press the [PROG/ENT] key
to change the setting.
•
Press the [MODE] key to go back to Monitor mode. The
third display item has been changed to the inverter
output power (kW).