LSIS 6731001500, Руководство пользователя

Страница: 328 / 659

315
Learning Advanced Features
Fault Trip Output by Multi-function Output Terminal and Relay - Setting Details
5.48.3 Multi-function Output Terminal Delay Time Settings
Set on-delay and off-delay times separately to control the output terminal and relay operation
times. The delay time set at codes OUT-50–51 applies to multi-function output terminal (Q1) and
relay, except when the multi-function output function is in fault trip mode.
Group Code Name LCD Display Parameter Setting Setting Range Unit
OUT
50
Multi-function output
On delay
DO On Delay 0.00 0.00–100.00 sec
51
Multi-function output
Off delay
DO Off Delay 0.00 0.00–100.00 sec
52
Select multi-function
output terminal DO NC/NO
Sel
000000* 00–11 bit
*Multi-function output terminals are numbered. Starting from the right (number 1), the number
increases to the left.
Code Description
OUT-30
Trip Out Mode
Fault trip relay operates based on the fault trip output settings.
Item bit on bit off
Keypad
display
Select a fault trip output terminal/relay and select ‘29’ (Trip Mode) at codes OUT- 31–
33. When a fault trip occurs in the inverter, the relevant terminal and relay will
operate. Depending on the fault trip type, terminal and relay operation can be
configured as shown in the table below.
Setting Function
bit3 bit2 bit1
Operates when low voltage fault trips occur
Operates when fault trips other than low voltage occur
Operates when auto restart fails (PRT-08–09)
OUT-31–35 Relay1–
5
Set relay output (Relay 1–5).
OUT-36
Q1 Define
Select output for multi-function output terminal (Q1). Q1 is open collector TR output.