LSIS 6731001500, Руководство пользователя, Страница: 153 / 659

140
Learning Basic Features
4.18.3 Frequency Jump
Use frequency jump to avoid mechanical resonance frequencies. The inverter will avoid identified
ranges during acceleration and deceleration. Operation frequencies cannot be set within the pre-
set frequency jump band.
When a frequency setting is increased, while the frequency parameter setting value (voltage,
current, RS-485 communication, keypad setting, etc.) is within a jump frequency band the
frequency will be maintained at the lower limit value of the frequency band. Then, the frequency
will increase when the frequency parameter setting exceeds the range of frequencies used by the
frequency jump band.
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
ADV
27 Frequency jump Jump Freq 00–1 0–1 -
28
Jump frequency
lower limit1
Jump Lo 1 10.00
0.00–Jump frequency
upper limit 1
Hz
29
Jump frequency
upper limit1
Jump Hi 1 15.00
Jump frequency lower
limit 1–Maximum
frequency
Hz
30
Jump frequency
lower limit 2
Jump Lo 2 20.00
0.00–Jump frequency
upper limit 2
Hz
31
Jump frequency
upper limit 2
Jump Hi 2 25.00
Jump frequency lower
limit 2–Maximum
frequency
Hz
32
Jump frequency
lower limit 3
Jump Lo 3 30.00
0.00–Jump frequency
upper limit 3
Hz
33
Jump frequency
upper limit 3
Jump Hi 3 35.00
Jump frequency lower
limit 3–Maximum
Hz
ADV-33
ADV-32
ADV-31
ADV-30
ADV-29
ADV-28
10V V1
20mA I 0
(voltage input)
(current input)
when the frequency reference decreases
Run cmd
Frequency
when the frequency reference increases