LSIS 6731001500, Руководство пользователя

Страница: 220 / 659

207
Learning Advanced Features
The time set at AP2-39 refers to the absolute time that it takes for the pump to decelerate from the
frequency set at AP2-38 to the frequency limit set at ADV-25.
5.17 Load Tuning
Load tuning refers to an operation that detects the load applied to a specific section of the inverter
operation (current and voltage) and creates an ideal load curve for the under load and pump
clean operations. The two set points to define the section are user-definable, and are set at 50%
and 85% of the base frequency (DRV-18 Base Freq) by default. The load tuning result values are
saved at codes AP2-2–AP2-10. These values are user definable as well.
The minimum set point for the load tuning begins at 15% of the base frequency (DRV-18 Base
Freq), and the maximum set point can be set up to the base frequency. If the frequency limit is set
to ‘1 (Yes)’ at ADV-24 (Freq Limit), the range is limited within the frequencies set at ADV-25 (Freq
Limit Lo) and ADV-26 (Freq Limit Hi).
Group Code Name LCD Display Parameter Setting Setting Range Unit
AP2
01
Load curve
Tuning
Load Tune No
0 No
-
1 Yes
02
Load curve Low
Freq Load Fit
LFreq
30.00
Base Freq*15%–
Load Fit HFreq
Hz
03
Current for Low
Freq Load Fit
LCurr
40.0 0.0–200.0 %
04
Power for Low
Freq
Load Fit LPwr 30.0 0.0–200.0 %
08
Load curve High
Freq Load Fit
HFreq
51.00
Load Fit LFreq–
High Freq
Hz
09
Current for High
Freq Load Fit
HCurr
80.0 0.0–200.0 %
10
Power for High
Freq Load Fit
HPwr
80.0 0.0–200.0 %
11
Load current for
frequency Load Curve
Cur
- - %
12
Load power for
frequency Load Curve
Pwr
- - %