LSIS 6731001500, Руководство пользователя

Страница: 218 / 659

205
Learning Advanced Features
Group Code Name LCD Display Parameter Setting Setting Range Unit
ADV
24
Frequency limit
options
Freq Limit 0: No
0 No
-
1 Yes
25
Low Freq
minimum value
Freq Limit Lo 30.00
Start Freq–
Max Freq
Hz
26
Low Freq
maximum value
Freq Limit Hi 60.00
Freq Limit Lo–
Max Freq
Hz
Start & End Ramp Operation Setting Details
Code Description
AP2-40 Start&End
Ramp
Sets the pump Start & End Ramp options.
Setting Function
0 No The Start & End Ramp operation is not used.
1 Yes Use the Start & End Ramp operation.
AP2-41 Start Ramp
Acc
Refers to the time it takes to reach the minimum pump operation frequency
for a Start & End Ramp operation (Freq Limit Lo) set at ADV-25 when the
inverter starts (it is different from DRV-03 acceleration gradient).
AP2-42 End Ramp
Dec
Refers to the time it takes to reach the 0 step (stop) from the minimum pump
operation frequency for a Start & End Ramp operation (Freq Limit Lo) set at
ADV-25 (it is different from DRV-03 deceleration gradient).
< Start&End Ramp Adjustment>
In the figure above, AP2-41 defines the acceleration time to the minimum operation frequency
ADV-25 (
Freq Limt Lo
)
. AP2-42 defines the deceleration time from the minimum operation
frequency to a stopped state. Time A (normal acceleration time set at DRV-03) and Time B (normal
deceleration time set at DRV-04) in the figure will change according to the Acc/Dec gradients
defined by AP2-41 and AP2-42.