LSIS 6731001500, Руководство пользователя

Страница: 286 / 659

273
Learning Advanced Features
MMC Setting Details
Code Description
AP1-40 MMC Sel
Selects the MMC operation settings.
-None : Deactivates MMC function
-Single Ctrl : Activates general MMC function
-Multi Follower : Activates Master Follower as Multi Follower mode
-Multi Master: Activates Master Follower as Multi Master mode
-Serve Drv: Sets Serve Drv used at Master Follower.
AP1-42 Num of Aux Decides the number of auxiliary motors to use.
AP1-43 Starting Aux Sets the start auxiliary motor.
AP1-44 Aux Motor Run Indicates the number of the operating auxiliary motors.
AP1-45–46 Aux Priority1–2
Indicates the operating priority of auxiliary motors.
According to setting by users, it can be influenced by Interlock,
AutoChange and operating time
Each four-digit numbers for the parameter mean the auxiliary motor
numbers and indicate the priority of auxiliary motors. In other words,
the most right number of [AP1-45 Aux Priority1] indicates the priority
of Auxiliary motor 1 and the second number from the right of [AP1-
45 Aux Priority1] indicates the priority of Auxiliary motor 2.
[AP1-45 Aux Priority1]
x x x x
The Priority of
the Aux motor1
The Priority of
the Aux motor4
[AP1-46 Aux Priority2]
x x x x
The Priority of
the Aux motor5
The Priority of
the Aux motor8
AP1-48 Aux All Stop
When [AP1-48 Aux All Stop] is set to “No” during input to stop
operating, auxiliary motors are turned off at the same time. When
[AP1-48 Aux All Stop] is set to “YES”, auxiliary motors are turned off
gradually based on time of [AP1-54 Aux Stop DT].
AP1-49 FIFO/FILO
Sets the operating priority of MMC.
FIFO : Same as On/Off order of auxiliary motors.
FILO: Opposite to On/Off order auxiliary motors.
Op Time Order : setting automatically according to operating time of
auxiliary motors.
AP1-50 Aux Start Diff
AP1-59 Aux Stop Diff
One of the conditions to turn on and off the next auxiliary motors.
Parameters to set the difference when the difference between the
reference and feedback is more than regular value