8
Id.-Nr.: 1556.212 .1-07
Safety notes
2
Safety notes
2.1
Representation
At various points in this manual, you will see notes and precautionary warnings re-
garding possible hazards. The symbols used have the following meaning:
DANGER!
indicates an imminently hazardous situation, which will result in death or
serious bodily injury if the corresponding precautions are not taken.
WARNING!
indicates a potentially hazardous situation, which can result in death or se-
rious bodily injury if the corresponding precautions are not taken.
CAUTION!
means that if the corresponding safety measures are not taken, a poten-
tially hazardous situation can occur that may result in slight bodily injury.
Caution
means that damage to property can occur if the corresponding safety mea-
sures are not taken.
ESD
This symbol reminds you of the possible consequences of touching electro-
statically sensitive components.
Safety information
Describes important safety-related requirements or informs about
essential safety-related coherences.
Information
Identifies practical tips and useful information. No information that warns
about potentially dangerous or harmful functions is contained.
2.2
General safety insutructions
The documentation contains information necessary for planning the use of the Mo-
tionOne system.
Familiarity with and correct application of the information contained in these manuals
is a prerequisite for successful planning and safe installation, commissioning and
maintenance of automation systems. Only properly qualified personnel have the re-
quired specialist knowledge to correctly interpret and implement the instructions
given in this manual.
Not every single detail of every version of the products described is listed nor can ev-
ery conceivable practical situation be taken into consideration. Should you require
additional information, please contact LTI.
When installing, commissioning and servicing MotionOne products the instructions
given in the relevant part of the documentation must be observed.
2.3
Personnel safety
WARNING!
Unqualified interventions in the control may cause abnormal behavior of
the machine/plant or personal injury or damage to the equipment. Only
specially qualified staff may carry out activities on the control system.
