6
Id.-Nr.: 1556.212 .1-07
Introduction
1
Introduction
1.1
Purpose of the document
This document describes the structure of the MotionOne system..
In addition, it describes the assembly and installation, the wiring aswell as the opera-
tion and displays of the modules.
The installation and configuration is described enough to obtain an operationally
ready system. "Ready for operation" means that the system and/or the respective
CPU modules are ready for loading the customer application.
1.2
Preconditions
The system manual is intended for all those using a MotionOne 3 system or those
who plan to use such a system.
Only electrically trained personnel, as specified by VDE 1000-10, are authorized to
install and maintain a system.
Target group
Prerequisite knowledge and ability
Safety engineer
for"Functional safety"
Technical training (university of applied science, engineering training
or corresponding professional experience).
Knowledge about:
• Principles of functional safety
• Relevant standards and safety regulations for the machine/sys-
tem, particularly knowledge about validation according to EN ISO
13849,
• Special risk potential of the machine/system and the production
process
• Specific protective measures to avert machine-specific hazards
(based on hazard and risk analysis)
• Functioning and application limits of the safety components (in-
cluding safety PLC)
• In-depth knowledge of national accident prevention regulations.
Target group
Prerequisite knowledge and ability
Project engineer
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
• the method of operation of a PLC,
• current valid safety regulations
• the application.
Electrician
Professional training in electrical engineering (based on industry-stan-
dard training guidelines).
Knowledge about:
• Current valid safety regulations,
• Wiring guidelines,
• Circuit diagrams,
• System analysis and troubleshooting,
• Professional installation of electrical connections according to na-
tional and international directives
Programmer
Technical training (University of Applied Science, engineering degree
or corresponding professional experience).
Knowledge about:
• Method of operation of a PLC,
• Current valid safety regulations,
• Programming of a PLC (IEC61131).
Start-up technician
Basic technical training (technical college, engineer training or corre-
sponding professional experience).
Knowledge about:
• Current valid safety regulations,
• Method of operation of the machine or plant,
• Fundamental functions of the application,
• System analysis and troubleshooting,
• Setting options on the operating devices.
Service technician
Basic technical training (technical college, engineer training or corre-
sponding professional experience).
Knowledge about:
• Method of operation of a PLC,
• current valid safety regulations
• Method of operation of the machine or plant,
• Diagnostic options,
• Systematic fault analysis and remedial action.
