38
Id.-Nr.: 1556.212 .1-07
Device Administration (DevAdmin)
Setting
Description
Image
Drop down list with avaiable and compatible
device images, which are located in the con-
nected USB stick
Reboot
• On success: Device is restarted after a
successful backup
• On error: Device is restarted after a failed
backup
Network settings
• From image: Network settings are taken
from image that should be restored
• From device: Current network settings are
kept
With
Backup
a backup is generated and with
Restore
the restore process is started.
After clicking a safety request is shown. Afterwards the preparation starts and the de-
vice is rebooted. No further information is shown via web interface.
Information
If there are no device images, the dropdown list and the restore button are
deactivated. The used USB stick must not be bootable.
10.4
Tab "Monitor"
Information
If the tab "Monitor" is not displayed, the long-term diagnostic of device data
must be installed on the control via MotionCenter (see online help of Mo-
tionCenter).
The tab "Monitor" is divided into the following areas:
•
Problems
•
Groups
•
Categories
Fig. 10.17:
DevAdmin - Monitor
Problems
In this area the occurring faults divided to their priotity are displayed.
Groups
In this area all available diagrams are listed and can be selected.
Categories
In this area the categories for the long-term diagnostic are listed. After choosing a
category, the corresponding diagramms are displayed. These diagramms are also
saved when triggering a status report.
Beside the category, the daily overview
d
, the weekly overview
w
, the montly
overview
m
or the yearly overview
y
can be called via the corresponding letters
d w
m y
. An overview with 4 diagramms consisting of daily, weekly, montly and yearly
overview is opened through clicking on a diagram.
The following diagrams can be displayed:
