66
Id.-Nr.: 1556.212 .1-07
Appendix: Tutorial - Creating a visualization
19.7
Restart of the control
The control must be restarted in order for the visualization that has been loaded onto
the control to also be executed there and displayed on the panel. A restart of the con-
trol can be triggered directly from MotionCenter via the device manipulation. To do
so, proceed as follows:
1.
Log in on the control (see Appendix: Tutorial - Creating a visualization)
2.
Open the context menu of the control in the project tree of MotionCenter and se-
lect
Device Manipulation > Restart Controller
.
Fig. 19.50:
Device manipulation
After a couple of seconds, the control runs again and the display shows the down-
loaded visualization with the mask created in this tutorial.
