59
Id.-Nr.: 1556.212.1-07
Appendix: Tutorial - creating an IEC project
Fig. 18.37:
Selection of the data to be uploaded on the control
If a new configuration is loaded onto the control, the control must be restarted. To do
this, a dialog is displayed after the configuration is downloaded. If this dialog is con-
firmed, only the configuration is loaded onto the control and the control implements a
restart. The download of the other software components can then be carried out. If
the dialog is not confirmed, all required software components are loaded onto the
control. The control must then be restarted.
18.7
Starting the project
The downloaded project has not been started yet. To do so, open the module
myProg in MotionCenter by double-clicking on it and call up the menu command
De-
bug > Start
(or function key
F5
or
on the toolbar).
The sample program that was just created runs, and the value changes of the vari-
able utilized in the program module are indicated:
