7
Id.-Nr.: 1556.212.1-07
Introduction
1.3
Intended use
A MotionOne system may only be used for the types of use described in the technical
descriptions and only in conjunction with recommended/approved third-party equip-
ment/installations.
All modules of the MotionOne system have been developed, manufactured, tested
and documented in accordance with the appropriate safety standards. Therefore, the
products do not pose any danger to the health of persons or a risk of damage to
other property or equipment under normal circumstances, provided that the instruc-
tions and safety precautions relating to the intended use are properly observed.
The system is intended for installation in a control cabinet and may only be used in
the following way:
•
Only in the industrial sector
•
in accordance with regulations
•
In a faultless technical condition
•
In its original state without unauthorized modifications.
Only alterations and modifications described in the accompanying documentation are
authorized.
Preconditions for correct operation with functional safety are:
•
The correct projection of the system
•
The correct and complete installing of all components under the designation of
the specified environmental conditions.
•
Creation of a complete safety application
•
Verification and validation of all safety functions
•
Compliance of the requirements of the machine directive and local law for the
complete machine if necessary.
1.4
Notes on this document
Information
If necessary, also adhere to the documentation accompanying the mod-
ules.
1.4.1
Contents of the document
•
System overview
•
Explanation of all operating elements and displays
•
Description of the assembly and installation
•
Operating behavior
•
Description of the software installation
•
Description of the software interfaces
•
Diagnosis and maintenance information
•
Technical data
•
EMC and wiring guidelines
•
Terminology
1.4.2
Not contained in this document
•
Programming instruction
•
Application diagnosis
•
Firmware description
1.5
Further documentation
Documents for systems components (drive technology, teach pendants, controls, IO-
modules, ...) are included in your shipment. For each product an operation manual
exists, which includes detailed information about start-up and operation. Documenta-
tion of the tools is integrated as online help.
1.6
Relevant countries and registrations
Standards and test values which the product conforms to and meets are contained in
the chapters "Technical Data" and "EC directives and standards". For the EU guide-
lines relevant to the product please see the declaration of conformity.
